Available in storeClose
This is the exact neck you'll receive! Only removed from original packaging for inspection/photos.
Weight - 1lbs 0.9oz
Unfinished Fender® licensed replacement neck for Telecaster® guitars.
- 22 jumbo frets
- Solid 1 piece sanded maple
- Standard shape and profile
- 12 inch radius
- Nut width 1-5/8 inch
- Heel width 2-3/16 inches
- Tuning peg hole diameter .340 inch
- Truss rod adjustment at heel
This neck is made of the highest quality wood in either the United States or Japan. No two necks are exactly the same in grain pattern and all will vary from the product pictured. This neck has a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications.
This neck is licensed to Allparts Music Corporation by Fender® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender® and no Fender® warranty applies.
All Fender® licensed Allparts necks are marked as such on the heel.
All necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patters. Allparts cannot warranty a neck that does not get a sealer/finish put on it, as humidity, sweat, and temperature can cause the neck to warp and twist.